A properly designed and operating refrigeration system is
key to satisfaction with your walk-in cooler or freezer.
There is nothing worse than finding out that the system
you have will not perform according to your requirements.
That is why our sales engineers take the time to find out
how you expect your system to perform. Before we ship you
a system, we will work with you to ensure that the system
we send is the system you need for your application.
We provide two styles of refrigeration
systems for you to choose from. Each system uses only quality
components to ensure proper operation. These systems come
in several configurations with hermetic, semi-hermetic and
scroll compressors, air-cooled or water cooled condensers,
R-22 or R404A refrigerants and various electrical voltages.
The basic models are listed below.
1. Pre-Charged Remote, self-contained
remote units, model designation "PCL".
Units are limited to 3 1/2 horsepower for coolers and
3 horsepower for freezers. These systems are completely
assembled including control components, internal electrical
wiring and pre-charged line sets up to 40 feet long. An
electrician has to bring power to a main connection point
on the condensing unit and on the evaporator coil. "PCL"
systems are available for indoor or outdoor mounting. These
systems are made to mount on a curb or they can be ordered
with a metal rack with legs for mounting to a slab or
roof. Click
here for more information.
2. Pre-Assembled Remote, model designation "PR".
Units have all components mounted and wired but do not
have refrigeration lines or a refrigerant charge. These
systems are made to mount on a curb or they can be ordered
with a metal rack with legs for mounting to a slab or
roof. An electrician has to bring power to a main connection
point on the condensing unit and on the evaporator coil.
"PR" systems are available for indoor or outdoor
mounting. Click
here for more information.
Refrigeration
System Design